АНАЛИЗ НА ХАРАКТЕРИСТИКИ НА АКУМУЛАТОРНИ УСТРОЙСТВА

  • Atanas Dimitrov
  • Angel Toshkov
  • Yanislav Zelev
  • Maria Monova-Jeleva
Ключови думи: акумулаторни батерии, електрохимични процеси, никел-кадмий, никел метал-хидрид, литий-йон, литий-полимер, оловни, тягови

Абстракт

В статията са анализирани и представени различните съвременни технологии, използвани при изграждането на тягови акумулаторни батерии и устройства, подходящи за електрозадвижвания. Разгледани са конструктивните особености на най-разпространените типове батерии: никел-кадмиеви, никел метал-хидридни, литиево-йонни, литиево полимерни и оловни, материалите от които са изградени акумулаторните клетки, както и електрохимичните процеси възникващи при заряд и разряд в клетките на батериите. За всеки конкретен тип технология са посочени типичните параметри, както и основните предимства и недостатъци.

Литература

[1] A. Cooper and P. Moseley, "VRLA Batteries Match the Performance of NiMH Batteries in Power-Assist Hybrids," Hybrid and Eco-Friendly Vehicle Conference, 2008, IET HEVC 2008, IEEE, 2008, pp. 1-4.
[2] A. Kiehne, H, Battery technology handbook - second edition, Marcel Dekker Inc, 2003.
[3] A. Kirchev and D. Pavlov, "Influence of temperature and electrolyte saturation on rate and efficiency of oxygen cycle in VRLAB," Journal of Power Sources, vol. 162, 2006, pp. 864-869.
[4] A. Kirchev, A. Delaille, F. Karoui, M. Perrin, E. Lemaire, and F. Mattera, "Studies of the pulse charge of lead-acid batteries for PV applicationsPart III. Electrolyte concentration effects on the electrochemical performance of the positive plate," Journal of Power Sources, vol. 179, 2008, pp. 808-818.
[5] A. Kirchev, A. Delaille, M. Perrin, E. Lemaire, and F. Mattera, "Studies of the pulse charge of lead-acid batteries for PV applicationsPart II. Impedance of the positive plate revisited," Journal of Power Sources, vol. 170, 2007, pp. 495-512.
[6] A. Kirchev, F. Mattera, E. Lemaire, and K. Dong, "Studies of the pulse charge of lead-acid batteries for photovoltaic applicationsPart IV. Pulse charge of the negative plate," Journal of Power Sources, vol. 191, 2009, pp. 82-90.
[7] A. Kirchev, M. Perrin, E. Lemaire, F. Karoui, and F. Mattera, "Studies of the pulse charge of lead-acid batteries for PV applicationsPart I. Factors influencing the mechanism of the pulse charge of the positive plate," Journal of Power Sources, vol. 177, 2008, pp. 217-225.
[8] A.F. Burke, "Batteries and Ultracapacitors for Electric, Hybrid, and Fuel Cell Vehicles," Proceedings of the IEEE, vol. 95, 2007, pp. 806-820.
[9] A.P. Soares, M.F. Rosolem, L.A. Soares, G.R. dos Santos, P.T. Frare, R.F. Beck, and V.T. Arioli, "Storage impact in VRLA batteries life," INTELEC 2008 - 2008 IEEE 30th International Telecommunications Energy Conference, IEEE, 2008, pp. 1-8.
[10] B.G. Kim, F. Tredeau, and Z.M. Salameh, "Performance evaluation of lithium polymer batteries for use in electric vehicles," 2008 IEEE Vehicle Power and Propulsion Conference, IEEE, 2008, pp. 1-5.
[11] B.P. McGrath, D.G. Holmes, P.J. McGoldrick, and A.D. McIver, "Design of a Soft-Switched 6-kW Battery Charger for Traction Applications," IEEE Transactions on Power Electronics, vol. 22, 2007, pp. 1136-1144.
[12] C. Ashtiani, R. Wright, and G. Hunt, "Ultracapacitors for automotive applications," Journal of Power Sources, vol. 154, 2006, pp. 561-566.
[13] C. Robillard, "Lithium-metal-polymer batteries," IEEE Power Engineering Society General Meeting, 2005, IEEE, 2005, pp. 1207-1211.
[14] D. Brett, P. Aguiar, N. Brandon, R. Bull, R. Galloway, G. Hayes, K. Lillie, C. Mellors, C. Smith, and A. Tilley, "Concept and system design for a ZEBRA battery–intermediate temperature solid oxide fuel cell hybrid vehicle," Journal of Power Sources, vol. 157, 2006, pp. 782-798.
[15] D. Linden and T.B. Reddy, Handbook of batteries - third edition, McGraw – Hill, 2001.
[16] D. Pavlov, "Thermal phenomena during operation of the oxygen cycle in VRLAB and processes that cause them," Journal of Power Sources, vol. 158, 2006, pp. 964-976.
[17] D. Pavlov, B. Monahov, A. Kirchev, and D. Valkovska, "Thermal runaway in VRLAB—Phenomena, reaction mechanisms and monitoring," Journal of Power Sources, vol. 158, 2006, pp. 689-704.
[18] E. Karden, P. Shinn, P. Bostock, J. Cunningham, E. Schoultz, and D. Kok, "Requirements for future automotive batteries – a snapshot," Journal of Power Sources, vol. 144, 2005, pp. 505-512.
[19] E. Karden, S. Ploumen, B. Fricke, T. Miller, and K. Snyder, "Energy storage devices for future hybrid electric vehicles," Journal of Power Sources, vol. 168, 2007, pp. 2-11.
[20] F.Croce, S.Sacchetti, and B. Scrosati,"Advanced, lithium batteries based on high-performance composite polymer electrolytes,"Journal of Power Sources, vol.162, 2006, pp.685-689.
[21] H. Cha, Q. Tang, and F.Z. Peng, "Development of High Power DC-DC Converter for Metro Vehicle System," APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition, IEEE, 2007, pp. 1613-1618.
[22] H. Venkatasetty and Y. Jeong, "Recent advances in lithium-ion and lithium-polymer batteries," Seventeenth Annual Battery Conference on Applications and Advances. Proceedings of Conference (Cat. No.02TH8576), IEEE, 2002, pp. 173-178.
[23] I. Buchmann, "Understanding your batteries in a portable world. Article on battery choice and how to maximize service life," Fourteenth Annual Battery Conference on Applications and Advances. Proceedings of the Conference (Cat. No.99TH8371), IEEE, 1999, pp. 369-373.
[24] I. Buchmann, Batteries in a portable world – a handbook on rechargeable batteries for non – engineers, second edition, Cadex Electronics Inc, 2001.
[25] J. McDowall, "Conventional battery technologies-present and future," 2000 Power Engineering Society Summer Meeting (Cat. No.00CH37134), IEEE, 2000, pp. 1538-1540.
[26] J. McDowall, "Substation battery options-present and future," 1999 IEEE Transmission and Distribution Conference (Cat. No. 99CH36333), IEEE, 1999, pp. 518-522 vol.2.
[27] J. Nelson and W. Bolin, "Basics and advances in battery systems," IEEE Transactions on Industry Applications, vol. 31, 1995, pp. 419-428.
[28] J. Wang, Z. Sun, and X. Wei, "Performance and characteristic research in LiFePO4 battery for electric vehicle applications," 2009 IEEE Vehicle Power and Propulsion Conference, IEEE, 2009, pp. 1657-1661.
[29] L. De Jonghe and S. Visco, "High specific power lithium polymer rechargeable battery," Proceedings of 11th Annual Battery Conference on Applications and Advances, IEEE, 1996, pp. 163-165.
[30] M. Fetcenko, S. Ovshinsky, B. Reichman, K. Young, C. Fierro, J. Koch, A. Zallen, W. Mays, and T. Ouchi, "Recent advances in NiMH battery technology," Journal of Power Sources, vol. 165, 2007, pp. 544-551.
[31] M. Mastragostino and F. Soavi, "Strategies for high-performance supercapacitors for HEV," Journal of Power Sources, vol. 174, 2007, pp. 89-93.
[32] M. Saakes, R. Woortmeijer, and D. Schmal, "Bipolar lead–acid battery for hybrid vehicles," Journal of Power Sources, vol. 144, 2005, pp. 536-545.
[33] M. Soria, F. Trinidad, J. Lacadena, A. Sánchez, and J. Valenciano, "Advanced valve-regulated lead-acid batteries for hybrid vehicle applications," Journal of Power Sources, vol. 168, 2007, pp. 12-21.
[34] O. Hasvold, N. Storkersen, S. Forseth, and T. Lian, "Power sources for autonomous underwater vehicles," Journal of Power Sources, vol. 162, 2006, pp. 935-942.
[35] P. Balakrishnan, R. Ramesh, and T. Prem Kumar, "Safety mechanisms in lithium-ion batteries," Journal of Power Sources, vol. 155, 2006, pp. 401-414.
[36] P. Bauerlein, C. Antonius, J. Loffler, and J. Kumpers, "Progress in high-power nickel–metal hydride batteries," Journal of Power Sources, vol. 176, 2008, pp. 547-554.
[37] P. Van Den Bossche, F. Vergels, J. Vanmierlo, J. Matheys, and W. Vanautenboer, "SUBAT: An assessment of sustainable battery technology," Journal of Power Sources, vol. 162, 2006, pp. 913-919.
[38] R. Spotnitz, "Advanced EV and HEV Batteries," 2005 IEEE Vehicle Power and Propulsion Conference, IEEE, 2005, pp. 334-337.
[39] S. Dhameja, Electric vehicle battery systems, Newnes, 2001
[40] T.R. Crompton, Battery reference book – third edition, Newnes, 2000.
[41] W. Hu, M. Geng, X. Gao, T. Burchardt, Z. Gong, D. Noréus, and N. Nakstad, "Effect of long-term overcharge and operated temperature on performance of rechargeable NiMH cells," Journal of Power Sources, vol. 159, 2006, pp. 1478-1483.
[42] W. Li, Y. Zheng, W. Li, Y. Zhao, and X. He, "A smart and simple PV charger for portable applications," 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC), 2010, pp. 2080-2084.
[43] Y. Nishi, K. Katayama, J. Shigetomi, and H. Horie, "The development of lithium-ion secondary battery systems for EV and HEV," Thirteenth Annual Battery Conference on Applications and Advances. Proceedings of the Conference, IEEE, 1998, pp. 31-36.
[44] Z.M. Salameh and B.G. Kim, "Advanced lithium polymer batteries," 2009 IEEE Power & Energy Society General Meeting, IEEE, 2009, pp. 1-5.
[45] И. Евтимов, Р. Иванов, and Б. Ангелов, "Акумулаторни батерии за електромобли и хибридни автомобили," Научни трудове на русенския университет - 2009, vol. 48, 2009, pp. 82-88.
[46] С. Гишин and К. Боев, "Изследвания и изпитания на акумулаторни батерии за транспорта," XVII Международна Научна Конференция "ТРАНСПОРТ 2007", Механика Транспорт Комуникации, 2007, pp. 27-32.
Публикуван
2018-05-24
Как да се цитира
Dimitrov, A., Toshkov, A., Zelev, Y., & Monova-Jeleva, M. (2018). АНАЛИЗ НА ХАРАКТЕРИСТИКИ НА АКУМУЛАТОРНИ УСТРОЙСТВА. КОМПЮТЪРНИ НАУКИ И КОМУНИКАЦИИ, 4(1), 33-56. изтеглен на от http://csc.bfu.bg/index.php/CSC/article/view/104
Раздел
Компютърни науки и комуникации - рецензирани публикации

Most read articles by the same author(s)